Technology News |
 - August 09th, 2005
|
 |
|
Innovation - the RCS3000M
The Turn-up System family of the IBS Paper Performance Group has a new member - the RCS3000M. This latest generation of Turn-up systems provides, like the RCS2000 series, the safest, efficient and most economical method of sheet transfer to a new reel. The manually operated system can be activated via a push button at the control panel or by the customer's DCS system. The small profile of the RCS3000M track allows for installation in the most confined reel sections while maintaining a reliable and safe sheet transfer.
| |
- July 14th, 2005 |
 |
|
Sensational results in France
Papeteries des Chatelles, a French producer of writing, copy and printing paper, ordered the rebuild and optimization of its wire section from the IBS Paper Performance Group. Included in the scope of supply were dewatering elements as well as a partial renewal of the vacuum system (EVA). The rebuild by the IBS Paper Performance Group resulted in a quality increase of approximately 20 %. Production has increased from 130 to 150 tons per day and there was a remarkable reduction in pressbrakes. These excellent results will allow Papeteries des Chatelles to recoup the costs of their upgrades within a period of 4 months!
| |
- July 1st, 2005 |
 |
|
Ceramics for Pama
The IBS Paper Performance Group has received an order for ceramics and boxes from Pama Papiermaschinen GmbH in Freiberg, Germany, for its Erbeek KM3 project.
| |
- June 21st, 2005 |
 |
|
Dryer section rebuild in Sweden
Jud Papiermaschinen AG was awarded to supply Felt Tensioners with integrated Load Cells, Piston Guides and a fully automatic Tension Control System for the 1st step of Dryer section rebuild at one of our customers in Sweden. A service package, such as machine measure-up on site, individual installation proposals for the Jud equipment, installation and start-up supervision and operator training was included as well. The Tension Control System with state-of-the-art technology, connection to machine DCS and operation via Touch Panel will allow to control and supervise all Fabric Tensioners in press and dryer section.
| |
- May 20th, 2005 |
 |
|
Big order for IBS
IBS has received an order for the papermachine of a leading Japanese board manufacturer. The scope includes all stainless steel drainage elements and ceramics for the wet-end with a fabric width of 7200 mm as well as the press section. This machine is a 3 layer machine operating at a speed of about 1150 m/min and producing around 1200 t/day of Kraft- and Test liner.
| |
- April 18th, 2005 |
 |
|
Rebuild in Finland
Jud Papiermaschinen AG was appointed to supply Felt Tensioners, Load Cells and Piston Guides for the Dryer section rebuild of a paper machine in Finland. Further, the order included an extensive service packaging namely machine measure-up on site, individual - customer specific solution proposals, installation and start-up supervision as well as an operator training.
| |
- April 1st, 2005 |
 |
|
IBS Dewatering Elements
IBS Paper Performance Group has been awarded by a customer to supply all dewatering elements for the rebuild of a papermachine. IBS supplied all ceramic blades and covers for the wire section, made of IBS silicium nitride and IBS silicium carbide.
| |
 - March 9th, 2005
|
 |
|
Blade Feed System successfully installed
The continuous blade feed system was installed at a customer in New York and is designed to perform blade changes in crepe applications without breaking or dropping the sheet. The blade travels at approximately 88 inches per minute, during a blade feed cycle. The continuous blade feed system eliminates downtime as a result of blade changes, in crepe applications.
| |
- February 4th, 2005 |
 |
Successful start-up in Poland
The IBS Paper Performance Group is proud to have been part of the successful start-up of Paper Machine PM3 at Malta Decor in Rudawa. This machine is equipped with one two-chamber box and one three-chamber box produced by IBS PPG. | |
- January 26nd, 2005 |
|
Automatic Wire Tensioner successfully installed in Sweden
Two members of the IBS Paper Performance Group, James Ross Limited and JUD Corporation, have supplied a new fully-automatic tensioning unit with a single doctor in Sweden. JUD supplied a TR902-X Tensioner with F1008BN Load Cell. James Ross supplied the corresponding doctor unit. | |
|
|
- December 17th, 2004 |
 |
Upcoming Rebuild Project in Turkey
The IBS Paper Performance Group has been awarded an exciting rebuild project scheduled to begin in december 2004 in Turkey. This order includes the supply of four Varioline boxes with IBS aluminium dewatering blades as well as an electronic vacuum system (EVA).
| |
 - November 24th, 2004
|
 |
New machining center at Berger
The IBS Paper Performance Group is proud to announce the start-up of the new, vertical machining center at Berger. The machining center is a Mazak VTC300C-2 with 4 axes, a moving length of 1740x760x660 mm and a 2000x5760 mm table. It is powered with 15 kW at 11.000 U/min.
| |
- April 29th, 2004 |
 |
New CNC machine for showers
Suitable for showers of a nominal diameter up to 250 mm and a width up to 10.000 mm
Cycle time ca. 120 sec. / injection tube
Capacity: 1 shift: 42 showers per calendar week
| |
- April 06th, 2004 |
 |
JRL New Ratcheting Lever Arm Design:
The James Ross Doctor Lever Arm design has been upgraded with a new unique adjustable design. The new design addresses many of the usual lever arm mounting design downfalls in the industry. There are many lever arm designs used to secure the doctor lever arm to the journals. Varying styles are key ways, set screws, compression sleeves, dowel pins, etc.
| |
- December 22nd, 2003 |
|
4 new World-Record-Machines with IBS-Ceramics !
IBS supplies the ceramics of four new World-Record-Machines:
|
|
|
m/min |
fpm |
| - Frankreich |
Newsprint |
Golbey PM 2 |
1902 |
6240 |
| - Kanada |
SC |
Port Hawkesbury PM 2 |
1732 |
5682 |
| - Finnland |
LWC |
Rauma PM 4 |
1830 |
6004 |
| - Finnland |
Fine |
Kuusankoski PM 8 |
1541 |
5056 | | |
- January 22nd, 2003 |
 |
Intelligent Bridge Sensor Module F 1016M
F 1016M is a multi channel module for transforming and monitoring online of measuring signals of felt or wire tension measuring units.
This module was especially developed for the requirements of the modern paper industry. The newly developed signal drift monitoring device as well as the signal drift compensation will enable an analysis of the measuring signals...
Please click HERE to get more information. | |
- October 10th, 2002 |
 |
Improved Sheet Formation with the Varioline Plus System
Varioline Plus - The adaptable dewatering system designed to generate micro-turbulence in the forming section, which can be configured "on-the-run" according to specific machine conditions. The manually or automatically adjustable activity blades can be raised or lowered to create a change in the profile of the paper web, which in turn has an optimal influence on the stock activity and sheet formation process. The Varioline Plus system is strongly recommended for paper grades with a basis weight greater than 30g/mē and for machines with speeds up to 1100 m/min. It is particularly effective when used in conjunction with the fully-automatic IBS EVA vacuum control system.
Please click HERE to get more information. | |
|
|
- June 27th, 2002 |
|
Online temperature monitoring for ceramic drainage elements
Especially during start up of modern high speed paper machines ceramics are exposed to frequent and drastic temperature changes. Quite often these temperature shocks are more than the ceramic material can handle.
Now IBS offers a solution to this problem:
IBS is able to integrate temperature sensors immediately beneath the top ceramic surface. Thereby the machine operator is able to monitor any temperature changes inside the ceramics and apply certain measures, if the temperature approaches critical levels. Such a measure could be to switch on a shower for example. By doing this any damage of ceramics and clothings can be prevented.
Please click HERE to get more information. | |
|
|
