 |
|
| |
| |
 |
Felt TensionerSystem advantages:
- easy to operate
- exact roll positioning with thread spindle drive
- fully enclosed stretcher arms with flexible cover
- low maintenance drive
- manual one-side seam adjustment
- manual emergency operation
- built for harsh environmental conditions
- additional center-support of stretcher arms for big take-up lengths and high-speed machines
Linear spindle Tensioner with two bevel gear boxes or worm gear boxes connected by a cross shaft. Drive either electric, air or hydraulic motor. The two gliding shoes with the spindle nut are carrying the tension roll bearing assembly, are driven by the acme thread spindles and are sliding on profiled beams. The stretcher arms are fully enclosed by stainless steel covers and a flexible cover.
The Linear Tensioners can be operated manually via pushbutton operation (F 113-2) or with the fully automatic JUD Tension Control which maintains a pre-set felt tension and controls the function of the Tensioner.
| Design spec's: |
|
bearing yokes or mounting plates for your pillow block
electric motor, air motor or hydraulic motor drives
individual displacement speeds
mechanical or inductive limit switches
integrated Load Cell for tension measurement
cover for cross shaft
manual or automatic seam adjustment device |
| Material: |
|
standard steel
stainless steel with gear boxes and gliding shoes in cast iron
all stainless steel
|
Technical data:
| Type of Felt Tensioner |
|
TL 503 |
TL 506 |
TL 508 |
TL 510 |
TL 808 |
| machine width app. |
[mm] |
3.000 |
6.000 |
8.000 |
10.000 |
8.000 |
| max. load horizontal |
[kN] |
30 |
60 |
80 |
100 |
60 |
| max. load vertical |
[kN] |
15 |
30 |
30 |
45 |
30 |
| travel up to |
[mm] |
2.000 |
3.000 |
3.000 |
3.000 |
3.000 |
| max. yoke diameter |
[mm] |
200 |
350 |
350 |
400 |
250 |
|
|
|
|
|
